Mobile Crane Operator - Hydraulic 80 Tonnes and Under
Mobile Crane Operator
Hydraulic 80 Tonnes and Under
- How to use rigging hardware and tools in the workplace
- How to interpret load charts and drawings
- How to assemble, operate, and disassemble a crane
- How to conduct a site assessment and safely position a crane
- How to operate a mobile crane to lift 80 tonnes and under
Mobile Crane Operators (80 tonnes and under) are attentive and careful tradespeople who enjoy the challenge of operating a complex, mobile vehicle safely and efficiently.
As a Mobile Crane Operator - Hydraulic 80 tonnes and under, you’ll lift a wide range of materials to and from building sites with confidence.
You’ll work largely at construction sites, managing everything to do with crane work including planning the lift, setting up the crane, and taking the crane down again when you’re done.
7.00
2.00
Training Hours
400
False
BC Crane Safety registration is required for all crane operators in British Columbia. Crane Operator certification in British Columbia is mandatory by virtue of the provincial Occupational Health and Safety Regulation (WorkSafeBC). BC Crane Safety Registration forms are available at bccranesafety.ca.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
- Exam Breakdown
- Code Book required: none
- Exam Breakdown
- Code Book provided: none
To book a practical assessment, please contact Fulford Certification.
Program and Exam Updates
August 2024: OPSN 2024 017 (Changes to practical assessment prerequisites)
June 2021: OPSN 2021 007 (Minimum operating requirement clarifications)
None.
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Workplace safety
- Advanced driving
- Hand-eye coordination
- Radio and hand communication
- Critical thinking and time management
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Mobile Crane Operator
Mobile Crane
Operator
- How to use rigging hardware and tools in the workplace
- How to interpret load charts and drawings
- How to assemble, operate, and disassemble a crane
- How to conduct a site assessment and safely position a crane
- How to operate a mobile crane to lift 80 tonnes and over
Mobile Crane Operators are precise, careful tradespeople who use calculations to safely move and lift the essential items and resources needed to build and repair a wide range of structures.
As a Mobile Crane Operator, you’ll make heavy lifting look easy as you hoist 80 tonnes and more of materials to and from building sites with confidence.
You’ll work largely at construction sites, railway, shipping yards or resource industry yards, managing everything to do with crane work including planning the lift, setting up the crane, and taking the crane down again when you’re done.
12.00
3.00
Training Hours
4980
False
BC Crane Safety Registration
BC Crane Safety registration is required for all crane operators in British Columbia. Crane Operator certification in British Columbia is mandatory by virtue of the provincial Occupational Health and Safety Regulation (WorkSafeBC). BC Crane Safety Registration forms are available at bccranesafety.ca.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information (2024) and Resources
Program Information (2024) and Resources
Effective September 1, 2024
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
- Exam Breakdown
- Acronyms and Formulas
- Code book required: none
- Exam Breakdown
- Acronyms and Formulas
- Code book required: none
- Red Seal Occupational Standard 2021
- Red Seal Exam Preparation Guide
- Red Seal Exam Breakdown (online)
- Red Seal Exam Breakdown (pdf)
- Code Book provided: none
To book a practical assessment, please contact Fulford Certification.
Program and Exam Updates
August 2024: OPSN 2024 017 (Changes to practical assessment prerequisites)
May 2024: For information regarding transition, please see the Program Update and Transition Plan
April 2024: OPSN 2024 012 (Revised Program Outline, Profile and SLEs effective September 1, 2024)
April 2022: OPSN 2022 007 (New Credit for Prior Learning in the challenge pathway)
June 2021: OPSN 2021 007 (Minimum operating requirement clarifications)
April 2024: OPSN 2024 012 (Revised Program Outline, Profile, and SLEs effective September 1, 2024)
March 2024: Program Update (IP Exams aligned to 2021 Red Seal Occupational Standards (RSOS)). A Comparative Analysis detailing changes between the 2012 NOA and 2021 RSOS can be found here.
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Workplace safety
- Advanced driving
- Hand-eye coordination
- Radio and hand communication
- Critical thinking and time management
Certification challenge only trade
1
To get certified, you will need to sign up for technical training at an approved training provider in addition to on-the-job training.
Visit Trades Training BC and EducationPlannerBC for a comprehensive list of what programs are available in your trade at public and non-public schools.
For a list of all approved non-public training providers, visit this page.
Heavy Equipment Operator
Heavy Equipment
Operator
- How to run bulldozers, backhoes, loaders and graders
- How to run dredging and pile-driving equipment
- How to operate heavy paving equipment for building roads
- How to assess safety for yourself and site workers
- How to do pre-operational checks and clean, lubricate and refill equipment
Heavy Equipment Operators are coordinated and decisive experts, whose focus on safety make them a perfect fit to operate the essential machines that move earth and excavate resources.
As a Heavy Equipment Operator, you’re a careful and confident professional who is completely at home operating a wide range of machines including bulldozers, backhoes, loaders, excavators—and more.
On any day, you could also be excavating rock and ore at a mine, running dredging equipment to deepen waterways, or clearing brush and stumps for roads or new construction.
4.00
1.00
Training Hours
0
True
Note: Training Provider designation applications are not accepted at this time. For questions or support, please contact designation@skilledtradesbc.ca.
Completion Declaration Forms
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Road Builder & Heavy Construction Foundation Information
Road Builder & Heavy Construction Foundation Information
The Road Builder and Heavy Construction Foundation program is intended to serve as a pre-employment program for individuals who wish to enter the road building and heavy construction industry.
Exam Information
Find exam-related information and resources below. Looking for more exam tips? Visit the Exam and Study Support page.
Certificate of Qualification Exam
Foundation Program Road Builder & Heavy Equipment Exam
Program and Exam Updates
Please note that the Forestry equipment endorsements (Feller/Buncher, Wheel Skidder, Track Skidder, Dangle Head Processor, Grapple Yarder & Log Loader) are unavailable pending further consultation.
The Exam Breakdown for the Certificate of Qualification is available and shows the approximate percentage of weighting per General Area of Competency (GAC).
Looking for more exam tips? Visit the Exam and Study Support page.
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Coordination and monitoring
- Essential heavy equipment knowledge
- Job control and engineering basics
- Environmental awareness, protection and enhancement
- Operation of haul trucks, loaders, dozers, excavators, graders and other equipment
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Embalmer and Funeral Director
Embalmer and
Funeral Director
- How to plan and schedule funeral services
- How to preserve and prepare human remains
- How to coordinate burials and cremations
- How to speak to grieving families about funeral arrangements and survivor benefits
- How to manage funeral home operations and staff
Embalmer and Funeral Directors play a very important role in a major event in many people’s lives. They are able to take on a big responsibility while ensuring the care and compassion needed.
As an Embalmer and Funeral Director, you’ll draw on your strong attention to detail and precision to oversee the many details that go into the preparation of human remains and the many different types of funerals.
You’re a compassionate & expressive individual, who works well in a challenging situation, taking great care to follow instructions while finding ways to be expressive in your work.
8.40
2.00
Training Hours
3600
False
No challenge process is currently available for this certification. This decision is currently under review. For further information please contact the BC Funeral Association on 1-250-592-3213 and at info@bcfunerals.com.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
Program and Exam Updates
August 2024: Instructor requirements for this program were updated. Please see the Program Update for more details.
None
- Communication and Coordination
- Funeral practices, law and service ethics
- Human anatomy and physiology
- Safety, sanitation and hygiene practice
- Embalming
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Embalmer
Embalmer
- How to identify and describe human anatomy
- How to identify and describe safety, sanitation and hygiene practices
- How to describe and practice embalming
- How to identify and describe funeral law
- How to employ strong communications skills
Embalmers are caring and attentive people. Their trustworthy nature make them a valuable resource in what is often a challenging time for families and friends.
As an Embalmer, you’ll take on a role that requires not just precision, but also allows for expression as you help to prepare or restore human remains.
You’ll be comfortable with large responsibility, as your work is a crucial part in an important and often very emotional time for others.
8.40
2.00
Training Hours
3600
False
No challenge process is currently available for this certification. This decision is currently under review. For further information please contact the BC Funeral Association on 1-250-592-3213 and at info@bcfunerals.com.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
Program and Exam Updates
August 2024: Instructor requirements for this program were updated. Please see the Program Update for more details.
None
- Communication
- Coordination
- Judgement and decision-making
- Human anatomy and physiology
- Embalming
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Tower Crane Operator
Tower Crane
Operator
- How to follow safe operation procedures
- How to identify various crane components
- How to install and inspect wire rope and rigging
- How to determine load and lifting capacity
- How to operate, transport and maintain a tower crane
Tower Crane Operators are calm, decisive and coordinated professionals who take on the challenge of lifting heavy loads to great heights while ensuring the safety of everyone around them.
As a Tower Crane Operator, you’ll enjoy taking on a challenging and satisfying role where you’re responsible for the safe movement of building materials and equipment.
You'll maintain focus on the task at hand. At the same time, you’ll be an expert in understanding the various procedures that go into a safe lift, including proper load and lifting capacities.
10.00
2.00
Training Hours
2650
False
BC Crane Safety Registration
BC Crane Safety registration is required for all crane operators in British Columbia. Crane Operator certification in British Columbia is mandatory by virtue of the provincial Occupational Health and Safety Regulation (WorkSafeBC). BC Crane Safety Registration forms are available at bccranesafety.ca.
Information for BC CofQ Holders
If you already hold a Tower Crane Operator BC Certificate of Qualification (CofQ), your certification is still valid and no action is required. If you wish to earn a Red Seal Endorsement on your BC CofQ, you may do so by writing and passing the Tower Crane Operator Interprovincial Red Seal exam. View Forms.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information and Resources
Program Information and Resources
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
- Exam Breakdown
- Acronyms and Formulas
- Code book required: none
- Exam Breakdown
- Acronyms and Formulas
- Code book required: none
- Red Seal Occupational Standard 2023
- Red Seal Exam Preparation Guide
- Red Seal Exam Breakdown (online)
- Red Seal Exam Breakdown (pdf)
- Code Book provided: none
To book a practical assessment, please contact Fulford Certification.
Program and Exam Updates
June 2025: OPSN 2025 010 (Changes to apprentice level exam challenge eligibility requirements)
September 2024: For information regarding transition, please see the Program Update
August 2024: OPSN 2024 018 (Revised Program Outline, Profile and SLEs effective October 1, 2024)
August 2024: OPSN 2024 017 (Changes to practical assessment prerequisites)
June 2021: OPSN 2021 007 (Minimum operating requirement clarifications)
June 2025: OPSN 2025 011 (IP Exams aligned to the 2023 Red Seal Occupational Standards (RSOS)). A Comparative Analysis detailing changes between the 2012 NOA and the 2023 RSOS can be found here.
June 2025: OPSN 2025 010 (Changes to apprentice level exam challenge eligibility requirements)
August 2024: OPSN 2024 018 (Revised Program Outline, Profile and SLEs effective October 1, 2024)
Challenge the Level Exam
Tower Crane Operator apprentices have specific requirements that differ from other trades when challenging level exams.
To challenge a level exam, submit a completed Tower Crane Operator Level Placement Exam Application Form to Customer Service. Incomplete applications will not be processed and will be returned to you.
There is no cost to apply for a Level Challenge exam.
For more information on eligibility requirements, please refer to OPSN 2025 010 and the Program Profile.
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Coordination and focus
- Regulatory compliance procedures
- Safe work procedures
- Rigging and hoisting
- Crane operations and maintenance
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Boom Truck Operator (Stiff Boom Unlimited Tonnage)
Boom Truck Operator
(Stiff Boom Unlimited Tonnage)
- How to conduct crane operations within safety guidelines
- How to employ proper rigging and lifting techniques
- How to calculate lifting methods
- How to transport and deliver a boom truck
- How to plan a site
Boom Truck Operators (Stiff Boom Unlimited Tonnage) move and lift the essential items and resources needed to build and repair a wide range of structures. They’re confident drivers and safety experts.
As a Boom Truck Operator (Stiff Boom Unlimited Tonnage) you’ll use your coordination skills to lift and hoist items. You’ll operate a complex piece of machinery, well-suited to placing loads on a smaller worksite, either on the ground or your truck deck. Every job requires your careful approach. You’ll demonstrate mental stamina—thriving when faced with complex tasks that demand great concentration.
9.00
2.00
Training Hours
400
False
BC Crane Safety registration is required for all crane operators in British Columbia. Crane Operator certification in British Columbia is mandatory by virtue of the provincial Occupational Health and Safety Regulation (WorkSafeBC). BC Crane Safety Registration forms are available on the BC Crane Safety website.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
- Exam Breakdown
- Code Book required: none
- Exam Breakdown
- Code Book provided: none
To book a practical assessment, please contact Fulford Certification.
Program and Exam Updates
August 2024: OPSN 2024 017 (Changes to practical assessment prerequisites)
June 2021: OPSN 2021 007 (Minimum operating requirement clarifications)
None
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Workplace safety
- Excellent driving skills
- Hand-eye coordination
- Boom truck operations
- Rigging and lifting skills
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Boom Truck Operator: (Folding Boom Unlimited Tonnage)
Boom Truck Operator
(Folding Boom Unlimited Tonnage)
- How to conduct crane operations within safety guidelines
- How to employ proper rigging and lifting techniques
- How to calculate lifting methods
- How to transport and deliver a boom truck
- How to plan a site
Boom Truck Operators (Folding Boom Unlimited Tonnage) move and lift the essential items and resources needed to build and repair a wide range of structures. They’re confident drivers and safety experts.
As a Boom Truck Operator (Folding Boom Unlimited Tonnage) you’ll use your coordination skills to lift and hoist items. You’ll operate a complex piece of machinery, well-suited to placing loads on a smaller worksite, either on the ground or your truck deck. Every job requires your careful approach. You’ll demonstrate mental stamina—thriving when faced with complex tasks that demand great concentration.
7.00
2.00
Training Hours
400
False
BC Crane Safety registration is required for all crane operators in British Columbia. Crane Operator certification in British Columbia is mandatory by virtue of the provincial Occupational Health and Safety Regulation (WorkSafeBC). BC Crane Safety Registration forms are available on the BC Crane Safety website.
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Exam Information and Resources
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
- Exam Breakdown
- Code Book required: none
- Exam Breakdown
- Code Book required: none
To book a practical assessment, please contact Fulford Certification.
Program and Exam Updates
August 2024: OPSN 2024 017 (Changes to practical assessment prerequisites)
June 2021: OPSN 2021 007 (Minimum operating requirement clarifications)
None
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
Declaration Forms Instructions
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Workplace safety
- Excellent driving skills
- Hand-eye coordination
- Boom truck operations
- Rigging and lifting skills
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship
Water Well Driller
Water Well
Driller
- How to review client needs and proposed locations for water wells
- How to operate water well drilling rigs
- How to install, test and maintain water well pumps, piping systems, well screens, casings and other well fixtures
- How to clean and disinfect wells in preparation for use
- How to conduct routine maintenance on equipment
Water Well Drillers are water experts who know how to identify water drilling locations and install, fix and maintain the valuable infrastructure that carries our most essential natural resource.
As a Water Well Driller, you’ll enjoy working outdoors as you operate specialized equipment to drill residential, commercial and industrial water wells.
Your role requires a calm and confident hand, as you’ll not only help customers select a drilling site and estimate the cost, but also identify safe, potable water and know how to clean and disinfect wells in preparation for use.
12.00
2.00
Training Hours
3240
False
For further information on this trade and for a detailed list of learning materials please contact BC Ground Water Association on 604-530-8934 (Toll free within BC: 1-855-530-8934) and at secretary@bcgwa.org
Technical Training
BC apprentices registered in this program must take their technical training in Alberta.
Program Information and Resources
Program Information and Resources
Exam Information
Find exam-related information and resources under each menu item below. Looking for more exam tips? Visit the Exam and Study Support page.
Certificate of Qualification Exam
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Critical thinking and monitoring
- Repair and maintenance
- Safety requirements and procedures
- Equipment operation
- Welding, cutting and drilling
Certification challenge only trade
1
Asphalt Paving/Laydown Technician
Asphalt Paving/
Laydown Technician
- How to work safely around asphalt trucks and equipment
- How to identify road structures
- How to describe asphalt production and products
- How to determine asphalt mix and design
- How to operate milling, reclaiming, paving, screed, raking and compacting equipment
Asphalt Paving/Laydown Technicians are confident, calm and coordinated tradespeople who build and repair the roads around us—and whose efforts ensure that we have safe surfaces to drive on.
As an Asphalt Paving/Laydown Technician, you’ll enjoy repairing and making the roads we depend on.
You thrive in an outdoor environment and can concentrate on operating the many pieces of equipment that go into roadwork. You also take great interest in the makeup of our roadways, understanding the various factors that influence gradient and road types.
4.00
1.00
Training Hours
400
False
Technical Training
The classroom is where you learn the technical knowledge to complement your work-based training. Make sure to register as early as possible to secure a seat for technical training with a SkilledTradesBC-designated training provider.
Visit Trades Training BC and EducationPlannerBC to find where this program is being offered across the province.
Program Information
Program Information
Exam Information and Resources
Find exam-related information and resources below. Looking for more exam tips? Visit the Exam and Study Support page.
Certificate of Qualification Exam
Code book required: none
Challenge the Certification Exam
Challenge the Certification Exam
If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.
If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.
Check the Program Profile on this page for the available pathway options and eligibility details.
Online Application
Create a SkilledTradesBC Portal account to start your application
Declaration Forms Instructions
A section-by-section guide on how to complete the declaration forms
Employer Declaration
A form for your employer to document and attest to your work experience
Statutory Declaration
A form for you to document and attest to your work experience from self-employment or because a direct supervisor cannot be contacted
- Coordination and critical thinking
- Large machinery operations
- Roadwork safety procedures
- Road building and paving principles
- Equipment maintenance
Certification challenge only trade
1
Interested in this trade? Learn how to start your apprenticeship.
Start Your Apprenticeship